ページ 3 - ON Semiconductorの最新テクノロジー | Heisener Electronics
連絡先
SalesDept@heisener.com 86-755-83210559-841
Language Translation

* Please refer to the English Version as our Official Version.

ON Semiconductorの最新テクノロジー

レコード 104
ページ  3/6
Technology Cover

2023-01-07, Onsemi's EliteSiC silicon carbide series solutions bring industry-leading energy efficiency

Onsemi's 1700 V EliteSiC MOSFET (NTH4L028N170M1) delivers SiC solutions with higher breakdown voltage (BV) required for high power industrial applications. Two 1700 V Avalanche EliteSiC Schottky diodes (NDSH25170A, NDSH10170A) allow designers to achieve stable operation at high temperatures and pressures while enabling high energy efficiency from SiC.

Technology Cover

2023-01-05, CMOS 3CH−LDOs of onsemi RF unit

The NCP4523 Series are multi voltage regulator ICs with high output voltage accuracy, extremely low supply current, low noise, low ON−resistance and high ripple rejection by CMOS process. The NCP4523 Series contain three voltage regulators. Each of these voltage regulators in the NCP4523 Series consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, a current limit circuit and a chip enable circuit

Technology Cover

2023-01-05, Half Bridge LLC Resonant Control IC Lighting FLS-XS series

The FLS−XS series of general lighting power controllers includes highly integrated power switches for medium− to high−power lumens applications. Offering everything necessary to build a reliable and robust half−bridge resonant converter, the FLS−XS series simplifies designs and improves productivity, while improving performance.

Technology Cover

2023-01-01, ACPI dual switch controller

The FAN5067 is an ACPI Switch Controller for Pentium IV Platforms. It is controlled by PWROK, SLP_S3 and SLP_S5, and provides 3.3V or 5V Dual and VADJ Dual output for SDRAM or DDR with 200mA minimum base current for an external NPN transistor. An on-board precision low TC reference achieves tight tolerance voltage regulation without expensive external components.

Technology Cover

2022-12-30, Green current mode PWM controller

The FAN7602 is a green current mode PWM controller. It is specially designed for off-line adapter application, DVDP, VCR, LCD monitor application, and auxiliary power supplies. The internal high-voltage start-up switch and the burstmode operation reduce the power loss in standby mode. Because of the internal start-up switch and the burst mode, it is possible to supply 0.5W load, limiting the input power to under 1W when the input line voltage is 265VAC. On no-load condition, the input power is under 0.3W

Technology Cover

2022-12-29, Monolithic high voltage gated oscillator power switch regulator

The NCP1050 through NCP1055 are monolithic high voltage regulators that enable end product equipment to be compliant with low standby power requirements. This device series combines the required converter functions allowing a simple and economical power system solution for office automation, consumer, and industrial products

Technology Cover

2022-12-23, Operational amplifier, single power 3.0 V to 44 V, low power

Quality bipolar fabrication with innovative design concepts are employed for the MC33171/72/74, NCV33172/74 series of monolithic operational amplifiers. These devices operate at 180 A per amplifier and offer 1.8 MHz of gain bandwidth product and 2.1 V/s slew rate without the use of JFET device technology

Technology Cover

2022-12-21, ON Semiconductor provides step-down switch regulators

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step−down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version.

Technology Cover

2022-12-21, ON Semiconductor 3.3V ECL differential receiver

The MC100LVEL16 is a differential receiver. The device is functionally equivalent to the EL16 device, operating from a 3.3 V supply. The LVEL16 exhibits a wider VIHCMR range than its EL16 counterpart. With output transition times and propagation delays comparable to the EL16 the LVEL16 is ideally suited for interfacing with high frequency sources at 3.3 V supplies

Technology Cover

2022-12-09, ON Semiconductor 3.0A, 15 V, step-down switch regulator

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step−down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V, and an adjustable output version.

Technology Cover

2022-12-08, ON Semiconductor Micropower Voltage Reference Diodes

The LM285/LM385 series are micropower two−terminal bandgap voltage regulator diodes. Designed to operate over a wide current range of 10 A to 20 mA, these devices feature exceptionally low dynamic impedance, low noise and stable operation over time and temperature. Tight voltage tolerances are achieved by on−chip trimming

Technology Cover

2022-12-01, ON Semiconductor multiphase mobile CPU synchronization step-down controller

The ADP3210 is a high efficiency, multiphase, synchronous, buck−switching regulator controller optimized for converting notebook battery voltage into the core supply voltage of high performance Intel processors. The part uses an internal 7−bit DAC to read Voltage Identification (VID) code directly from the processor that sets the output voltage. The phase relationship of the output signals can be configured for 1−, 2−, or 3−phase operation, with interleaved switching.

Technology Cover

2022-11-20, New method of ON inductive position sensing accelerates time to market

Leading the way in smart power and smart sensing technology, onsemi has introduced an innovative dual-inductance rotating position sensor, the NCS32100, which convincingly offers high speed and high precision. The NCS32100 uses a new patented method for inductive position sensing, making it ideal for deploying fast moving and industrial robot applications.

Technology Cover

2022-11-19, ON introduces MOSFET with innovative Top Cool package

ON announced the launch of a new family of MOSFET devices that employ innovative top-cooling to help designers solve challenging automotive applications, particularly motor control and DC-DC conversion. The launch TCPAK57 portfolio includes 40V, 60V and 80V. All devices operate at a junction temperature of 175°C (Tj) and comply with the AEC-Q101 Vehicle Certification and Production Parts Approval Process (PPAP).

Technology Cover

2022-11-12, NCL30160 1A LED driver evaluation board of ON

ON Semiconductor NCL30160 1A LED Driver evaluation board for NCL30160 with Strata Developer Studio. The NCL30160 is a NFET hysteresis step-down constant current driver (for high power LED). It is packaged with SOIC-8 and features such as fast load transient response, PWM LED dimming, resistance programmable LED current, short circuit LED protection, undervoltage locking and heat off

Technology Cover

2022-10-29, ON introduces ecoPin series, redefining brushless DC motor control

ON has launched its new ecoSpin series of brushless DC (" BLDC ") motor controllers. Ansemix simplifies the development of high-voltage motor control systems for applications such as HVAC, refrigeration and robotics by integrating control and actuation functions in a complete system-level package (SiP)

Technology Cover

2022-10-17, Onsemi NCV12711 current mode PWM controller

The onsemi NCV12711 Current-mode PWM controller is a fixed-frequency peak-current mode device with all the characteristics needed to implement a single-ended power converter topology. The NCV12711 operates at voltages of 4V to 45V and has a built-in programmable oscillator operating in the frequency range of 100 KHZ to 1MHz, with integrated slope compensation to prevent subharmonic oscillations

Technology Cover

2022-10-17, Onsemi NCN26010XMNEVB evaluation board

The onsemi NCN26010XMNEVB evaluation board is a demonstration and development platform for NCN26010 industrial Ethernet transceiver. The NCN26010 is a 10Mb/s IEEE 802.3CG-compatible device that includes a media Access Controller (MAC), a PLCA coordination sub-layer (RS), and a 10BASE-T1S PHY designed for industrial multipoint Ethernet.