ON Semiconductor HBL5006 Series LED shunts is providing a current bypass for LEDs going into an open circuit. LEDs are fragile when subjected to transients and surge conditions – the HBL5006 maintain high reliability for LEDs in applications such as headlights, lighthouses, bridges, aircraft, runways and more.
Molex has introduced new Multi-Port RF (MPRF) coaxial cable-to-board solutions, providing printed circuit board (PCB) designers and test and measurement engineers with a secure electrical connection suitable for high-vibration conditions. Featuring a rugged single housing design with dual latches to support the weight of the coaxial cables, the MPRF solution ensures a secure multi-port RF I/O connection.
TDK-Lambda’s EZA2500 2500W bi-directional DC-DC converter is designed to allow the user to develop energy storage systems with rechargeable batteries. The EZA2500 can change conversion direction at high speed and achieves high efficiency of 92% in both directions.
The Vishay VEML6040 RGBW colour sensor which detects red, green, blue and white light. The VEML6040 incorporates photodiodes, amplifiers and analog / digital circuits into a single chip using the CMOS process. Typical applications include handheld devices, notebooks, consumer devices and diverse industrial and mechanical systems.
Cherry energy-harvesting switch modules are aimed at the increasing demand for simple and flexible wireless data transmission of switch signals with maintenance-free low energy consumption. The innovative wireless and battery-less energy-harvesting technology provides effective control solutions for countless applications in almost every market sector including industrial and building automation, smart home and medical.
Texas Instruments (TI) has unveiled its low-cost C2000 Delfino F28377S microcontroller (MCU) LaunchPad development kit – the first LaunchPad for the Delfino line of MCU. Based on TI’s C2000 Delfino F28377S MCU, the LaunchPad offers 200MHz of 32-bit floating-point performance, newly integrated accelerators, as well as high-integrity analog and control peripherals.
The STMicroelectronics STEVAL-IFP023V1 16-Bit digital input card allows for performance evaluation of the CLT01-38S4 high-speed protected digital termination array in industrial environmental conditions.
The Panasonic PAN1740 next-generation Bluetooth Low Energy (BLE) Module enabling low-energy wireless connectivity. With demand for this type of connectivity accelerating in recent times, the BLE offers a reduced form factor, significantly lower power consumption and embedded Software Stack.
FCI’s Minitek Pwr Hybrid 3mm and 4.2mm connectors. Compared with traditional power connectors, the new Hybrid series benefits from an improved and flexible modular design. This ensures that the number and placement of power and signal contacts are highly configurable for many requirements and applications.
TE Connectivity’s Micro-MaTch, value-line, wire-to-board connectors feature a more economical design that more appropriately meets the needs of industrial, consumer, and data communications applications such as home automation and alarm equipment, mobile GPS devices, lighting, air and climate control units, CCTV, building surface control, set top boxes, audio, and video equipment, electronic voting machines and pay terminals.
The Silicon Labs SI7034 humidity and temperature sensors which include analog-to-digital converter, signal processing, calibration data, and an I²C interface. Low-K polymeric dielectrics for the humidity sensing enables the SI7034 to have low drift and low hysteresis.
Atmel announced that the company is powering the borderless nubia Z9 smartphone with its award-winning maXTouch T-series touchscreen solution. In today’s smartphone market, next-generation industrial designs and new display technologies are key differentiating factors that OEMs require to set their designs apart from their competition.
A new series of silicone-coated axial lead wirewound resistors has been introduced by Vishay. Providing superior short-term energy surge protection compared with standard wirewound devices, the CW – High Energy series resistors can also be utilized in high-temperature operating conditions up to +350C.
Suitable for a wide range of applications, ALPS surface-mount tactile switches. The low-profile switches have a distinctive tactile feel with top-push projected stems. Their projection structure helps prevent deterioration in the sharpness of the operating feel. They also feature a waterproof and dust-proof design.
Ametherm has released a new series of UL-approved circuit-protection thermistors with industry-high energy and steady state current ratings for inrush current limiting in power supplies from 50W to 200W, 1/8 HP motors and small pumps, lighting, and audio charging stations for portable consumer devices.
Vishay Precision Group (VPG) Powertron has announced the expansion of its S-Line of precision foil current-sense resistors with five new SHR series devices. Offered in a wide range of anodized aluminium package sizes, the made-in-Germany SHR 4-8065, SHR 4-80110, SHR 4-80216, SHR 4-80320, and SHR 4-80370 combine a low TCR of ±2 ppm/K with extremely high power ratings to 2500W.
Featuring dual-channel, 25MHz bandwidth and up to 10Vp-p output amplitude, the Tektronix AFG1022 arbitrary function generator. The four run modes, 50 built-in frequently-used waveforms and built-in 200MHz frequency counter cover most waveform generation needs for experiment and test jobs.
B&K Precision’s 8600 Series programmable DC electronic loads deliver the performance of modular system DC electronic loads in a compact benchtop format.
