A complete and configurable solution for managing four independent high-brightness LED channels using the STLUX385A digital controller, the STMicroelectronics STEVAL-ILL057V1 digital LED Channel Evaluation Board.
IDT’s 8V97051 wideband RF synthesizer / PLL with integrated voltage-controlled oscillator (VCO) offers a combination of high-performance, low power consumption and wide-tuning range. The device features an integrated VCO with a large tuning range capable of providing multi-band local oscillator (LO) frequency synthesis, limiting the need for multiple narrow-band RF synthesizers.
Bourns’ Trimpot potentiometer product line offers the widest array of sealed trimming potentiometers in the industry. The devices were developed using ceramics, thick-film printing, welding and brazing to offer the most reliable electronic products.
The connectors feature high nominal contact force and gold plated contacts. They are available in 6- and 8-circuit versions, in range of available profile heights that starts as low as 0.3mm and goes up to 2.4mm. The range also features 12-point soldering pads and a choice of three card placement directions (series 47019 only). Connectors for the latest nano SIMs (series 151059) are also available.
The Texas Instruments (TI) WL1837MODCOM8I is one of the two evaluation boards for the TI WiLink 8 combo module family. The WL1837MODCOM8I, which is compatible with many processors including TI’s Sitara processors, easily enables users to add both Wi-Fi and Bluetooth to home and building automation, smart energy, gateways, wireless audio, enterprise, wearables and many more industrial and Internet of Things (IoT) applications.
Atmel SAMW25 SmartConnect Wi-Fi modules feature the industry-leading, low power 2.4GHz IEEE 802.11 b/g/n Wi-Fi ATWINC1500 SoC (System on Chip) and the latest ARM CortexR-M0+ based microcontroller technology from Atmel.
The FSBB10CH120DF Motion SPM 3 Series module, part of the Motion SPM 3 module family from Fairchild Semiconductor. The FSBB10CH120DF is a smart power module (SPM) that features a 1200V, 10A three-phase inverter with short-circuit-rated insulated-gate bipolar transistors (IGBTs) that provide integral gate drivers and protection to minimize EMI.
Aimed at motor drives, alternative energy, welding equipment and other high working voltage applications, Vishay has introduced a new low-profile surface-mount 2.5A IGBT and MOSFET driver. The VOL3120 features a small footprint with a 2.5mm height and minimum 8mm clearance and external creepage distance.
The Analog Devices ADM1293 and ADM1294 digital power monitors with PMBus Interface, the high-accuracy, integrated digital power monitors provide digital current, voltage, and power monitoring using an on-chip, 12-bit analog-to-digital converter (ADC), communicated through a PMBus-compliant I2C interface.
Murata has introduced the NMUSB202MC, a competitively-priced surface-mount powered data isolator module that conveniently provides dual port USB data and power isolation from a single upstream port with full power (500mA) available from each port.
Microsemi has announced it will be unveiling a new member of its SparX-IV enterprise Ethernet switch product family, the VSC7449 offers significantly higher switching capacity and competitive port configurations. The new SparX-IV enterprise Ethernet switch is ideal for managed small and medium-sized enterprises (SMEs) and enterprise switch platforms, including Wi-Fi access and aggregation, as well as industrial Internet of Things (IoT) applications, says the company.
Infineon OptiMOS 5 Power MOSFETs are designed to meet requirements for improved system efficiency while reducing system costs. The devices feature lower RDS(on) and Figure of Merit (RDS(on) x Qg) compared to alternative devices. They are designed using a new silicon technology, optimized to meet and exceed the energy efficiency and power density requirements.
The Texas Instruments (TI) UCC24630 synchronous rectifier controller is a high-performance controller and driver for N-channel MOSFET power devices used for secondary-side synchronous rectification (SR). The combination of a controller and MOSFET emulates a near-ideal diode rectifier. This solution directly reduces power dissipation of the rectifier.
The FTDI’s FT600/FT601 is a USB 3.0 to FIFO (parallel) interface bridge chip. The device allows developers to upgrade USB 2.0 connections to the new higher-speed standard. Features include remote wake-up capability, multi-voltage I/O : 1.8V, 2.5V and 3.3V, and battery charging specification BC1.2 support.
Sanyo Denki 9GT fan series offers an industry-leading wide temperature range from -40C to +85C making them suitable for many applications which are not suitable for conventional fans.
Introduced as the industry’s first magnetic sensing integrated circuit (IC) with a fully-integrated fluxgate sensor and compensation coil driver, along with all the required signal conditioning circuitry – the DRV421 has been unveiled by Texas Instruments (TI).
Panasonic’s EVP-BB series light-touch switch is one of the smallest in the world measuring just 2.6mm x 1.6mm x 0.53mm. The EVP-BB series features a laser-welded design that helps to prevent actuator peel-off in the case of side-load or impact, says the company.
Pericom’s PI6C557 PCIe 2.0 clock generators, the spread spectrum clock generators, are compliant with PCI Express 2.0 and Ethernet requirements. The PI6C557 devices are used for PC or embedded systems to substantially reduce electromagnetic interference (EMI).