Multi-cell battery stack monitor | Heisener Electronics
連絡先 +86-755-83210559 ext. 807
Language Translation

* Please refer to the English Version as our Official Version.

Multi-cell battery stack monitor

Technology Cover
投稿日: 2023-04-08, Linear Technology

The LTC6811 is a multi-cell stack monitor that measures up to 12 cells connected in series with a total measurement error of less than 1.2mV. The 0V to 5V battery measurement range makes the LTC6811 suitable for most battery chemicals. All 12 units can be measured in 290µs, and low data acquisition rates can be selected for high noise reduction. Multiple LTC6811 devices can be connected in series, allowing simultaneous monitoring of long, high-voltage battery packs.

Each LTC6811 has an isoSPI interface for high speed, rf immunity, and telecommunication. With LTC6811-1, multiple devices are connected in a Daisy chain, all with a host processor attached. With LTC6811-2, multiple devices are connected to the host processor in parallel, each addressed separately.

The LTC6811 can be powered directly from the battery pack or from an isolated power supply. The LTC6811 includes passive balancing for each unit, each with a separate PWM duty ratio control. Additional features include onboard 5V regulators, five universal I/O cables and a sleep mode where current consumption is reduced to 4µa.


● LTC6804 pin-compatible upgrade

● A maximum of 12 battery units can be measured in series

● 1.2mV maximum total measurement error

● Stackable architecture for high voltage systems

-   Built-in isoSPI  interface

-   1Mb isolates serial communication

-   Single stranded cable, maximum 100 MB

● Low EMI sensitivity and emission

● 290µs measures all cells in the system

● Synchronization voltage and current measurement

● 16 bit ADC, programmable noise filter

● Designed for systems that comply with ISO 26262 standards

● Passive cell balance with programmable timer

● Five universal digital I/O or analog inputs

-   Temperature or other sensor input

-   It can be configured as an I2C or SPI master

● 4μA Sleep Mode Supply Current

● 48 Pin SSOP package

● AEC-Q100 is suitable for automotive applications


● Electric and hybrid electric vehicles

● Backup battery system

● Power grid energy storage

● High power portable equipment