TDK Corporation has introduced the TDK-Lambda brand 15W and 30W rated CCG-D dual output DC-DC converters. Similar to the single output CCG15-S and CCG30‑S, the products have the industry standard 1″ x 1″ footprint and can operate over a wide 4:1 input range.
Analog Devices ADM2795E Transceivers are 5kVrms signal-isolated RS-485 transceivers. The transceivers offer up to ±42V of AC/DC peak bus overvoltage fault protection on the RS-485 bus pins.
Microchip has released a highly integrated LoRa SiP family with an ultra-low-power 32-bit MCU, sub-GHz RF LoRa transceiver and software stack.
Analog Devices has announced a wide range of solutions within its advanced Industry 4.0 roadmap targeted at supporting industrial equipment OEMs to accelerate their path to Industry 4.0.
Power Integrations has released its BridgeSwitch integrated half-bridge (IHB) motor driver IC family. BridgeSwitch ICs provide high and low-side advanced FREDFETs with integrated lossless current sensing, ending in inverter conversion efficiency of up to 98.5% in BLDC motor drive applications to 300W.
TDK Corporation has extended the lineup of CeraLink capacitors with CeraLink FA types in modular flex-assembly technology.
Texas Instruments OPA2810DGKEVM Evaluation Module demonstrates the functionality and versatility of the dual-channel OPA2810 amplifier in the DGK (VSSOP-8) package.
Cypress Semiconductor has introduced a nonvolatile data-logging solution with ultra-low power consumption. This solution is perfect for the latest-generation portable medical and wearable devices and other IoT applications that require nonvolatile memories to continuously log a growing amount of user and sensor data while using as little power as possible.
Littelfuse has introduced the CPC1984Y, a 600V, Normally Open Power SIP Relay, rated for up to 1A DC/1Arms continuous load current, twice the load current of the company’s most popular power relay from IXYS Integrated Circuits, now part of the company.
Cypress Semiconductor has announced that global automotive supplier Yazaki North America has implemented the company’s instrument cluster solution to run the advanced graphics in its instrument cluster for a leading American car manufacturer.
For its recently released RPM and RBB10 series, RECOM has introduced corresponding evaluation boards which provide a shortcut to the otherwise long-winded testing, as these boards provide customers with an effortless way to evaluate these DOSA modules.
Texas Instruments OPA859 Wideband Low-Noise Operational Amplifier comes with CMOS inputs for wideband transimpedance and voltage amplifier applications.
Analog Devices ADL6010 Envelope Detector is a versatile, broadband envelope detector covering the microwave spectrum.
Fujitsu Electronics Europe is expanding its ultra-low power portfolio to incorporate a multi-receiver GNSS module: MSB1054. GNSS now encompasses a mixture of systems: not only GPS but also GLONASS, QZSS, SBAS, Galileo and BeiDou.
Analog Devices EVAL-CN0409-ARDZ Arduino Shield uses the ADPD105 photometric front end and a network of 860nm Infrared emitters and silicon PIN photodiodes to produce a water turbidity measurement system.
Texas Instruments TLIN1024-Q1 Quad Local Interconnect Network (LIN) is a physical layer transceiver, which integrates wake up and protection features.
Microchip Technology has announced a new IoT rapid development board as part of an enlarged partnership with Google Cloud, allowing designers to prototype connected devices within minutes.
Omron Electronics G3VM-401VY MOSFET Relays are a general purpose Solid-State Relays in a special SOP 4-pin package for a wide range of applications.
