NXP Semiconductor announced the launch of the new S32K39 family of Automotive Microcontrollers (MCUS) optimized for electric vehicle (EV) control applications. The high-speed, high-resolution control of the new generation of S32K39 MCU improves energy efficiency and provides a smoother EV driving experience while extending driving range to meet future electrification needs
STMicroelectronics' AEK-POW-LDOV01J and AEK-POW-LDOV01S are evaluation boards based on the L99VR01JTR and L99VR01STR. They can be used in several electronic applications, such as microcontroller supplies, automotive display drivers, sensors, and infotainment processors.
3M’s mini-stack connectors provide a reliable connection with a simple termination process while reducing the required board footprint. Their compact size allows for 30% more board space than the 3M mini-clamp connectors.
SCHURTER's IEC C14 6080 connector series with mating C13 V-Lock power cords are ideal for protection against dust and water ingress. The power entry combination provides an IP54 rating when power is connected during equipment operation as well as an IP67 rating between the connector and the appliance.
u-blox's LARA-R6 series cellular modules feature uncompromised global connectivity in a very small package. The series offers exceptional flexibility with global, regional, and multi-regional variants.
Renesas Electronics RTKA271082DE0000BU Evaluation Board is configured to evaluate the operation of the RAA271082 Automotive PMIC. The RAA271082 offers three synchronous buck regulators and one low dropout linear regulator.
The AMC23C12 is an isolated window comparator with a short response time. The open-drain output is separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 5 kVRMS according to VDE 0884-17 and UL1577, and supports a working voltage of up to 1 kVP
The Texas Instruments INA241x current detection amplifier is an ultra-precision bi-directional current detection amplifier that measures the voltage drop at both ends of the shunt resistor. The measurements were made within a common model range of -- 5V to 110V wide, independent of the supply voltage. High accuracy current measurement is achieved by combining a small gain error (±0.01%, maximum), low misalignment voltage (±10V µ, maximum), and high DC CMRR (typical value 166dB).
The MERUS multi-level switching technology launched by Infineon Technology Co., Ltd. aims to reduce switching loss and achieve efficient audio amplification performance at low output power and high output power, bringing significant advantages to such applications.
The PTN3222 is a 1-port USB2 to USB2 redriver IC that performs the conversion between eUSB2 and USB2 signaling schemes. It is used in a system with eUSB2 where one side is USB2 interface and the other side is USB2 interface. Support for host repeater, device repeater or dual role repeater function.
Microchip's PIC32CX-BZ2 and WBZ451 Curiosity development board, based on the WBZ451PE module, is the development platform for evaluating the PIC32CX-BZ2 family of MCUs. It comes preconfigured with an out-of-the-box multi-protocol demo application. It features a temperature sensor, a current measurement header, an RGB LED, and a MikroElectronika mikroBUS™ socket to attach many sensors and add-on boards.
PE64906 is a DuNE technology-enhanced digitally tunable capacitor (DTC) based on pSemi’s UltraCMOStechnology.This highly versatile product supports a wide variety of tuning circuit topologies with emphasis on impedance matching and aperture tuning applications.
Diodes Incorporated offers its latest PCIe 3.0 packet switch, the DIODES PI7C9X3G1224GP. This high-performance 12-port, 24-lane device can be employed in edge computing, data storage, communications infrastructure and integrated into host bus adaptors, industrial controllers, and network routers.
Offering 32-bit performance and ultra-low power controllers while offering memory configurations of up to 512KB flash memory and 64KB SRAM, Microchip Technology's family offers three different product options for designers looking to solve challenges in the Internet of Things, consumer, industrial and medical markets.
u-blox announced the launch of the u-blox ZED-F9K-01A, a high-precision GNSS module equipped with advanced embedded hardware, software and a new generation IMU (Inertial Measurement Unit) to provide a fully integrated high-precision positioning solution.
The MAPS-010165 is a GaAs pHEMT 6-bit digital phase shifter with an integrated CMOS driver in a 4 mm PQFN plastic surface mount package. Step size is 5.6° providing phase shift from 0° to 360° in 5.6° steps. This design has been. Surface mount package. Step size is 5.6° providing phase shift from 0° to 360° in 5.6° steps. This design has been optimized to minimize variation in attenuation over the phase shift range
Infineon Technologies has launched the XMC7000 series microcontroller (MCU) for industrial drive, electric vehicle (EV) charging, electric two-wheelers, robotics and other advanced industrial applications.
Melexis announced that Ideal Auto will include the 3D depth sensor MLX75027 in the Ideal L7, L8, L9 and luxury SUV models. With the advantages of 640×480 pixels and True VGA resolution, MLX75027 maps user gestures directly to the large full-color display mounted on the system to accurately restore user intentions.
