The L78L series three-end voltage regulator uses internal current limiting and thermal closing, making it essentially indestructible. They are widely used in fixed voltage regulators, including local or on-card regulation, to eliminate noise and distribution problems associated with single point regulation.
The LIS3L02AL is a low-power 3-axis linear capacitive accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and to provide an analog signal to the external world
The STNRG011A embodies a multi-mode (transition-mode and DCM) PFC controller, a high- voltage doubleended controller for the LLC resonant half-bridge, an 800 V-rated startup generator and a sophisticated digital engine, that manage optimal operation of three blocks.
The LEXX is a very low-dropout voltage regulator available in SO-8, TO-92 packages and over a wide range of output voltages.
The PM8801 integrates a standard compliant Power over Ethernet (PoE) interface and a current mode PWM controller to simplify the design of the power supply sections of all powered devices.
The LD49300 is a high-bandwidth, low-dropout, 3.0 A voltage regulator, ideal for powering core voltages of low power microprocessors. The LD49300 implements a dual supply configuration, which guarantees a very low output impedance and a fast transient response.
Stmicroelectronics introduces the 6-axis Inertial Measurement Unit (IMU) flagship LSM6DSV16X. The new product includes Stmicro's low-power sensor fusion (SFLP) technology, artificial intelligence (AI), and self-adaptive self-configuration (ASC) function, which can optimize power consumption.
Stmicroelectronics has introduced the 100W wireless charging receiver chip, the highest rated wireless charging receiver chip in the industry, for the fastest wireless charging on the market today. Using STMicro's new chip, the STWLC99, a high-end smartphone with the largest battery can be fully charged in less than 30 minutes.
The A5970D is a step-down monolithic power switching regulator, with a minimum switching current limit of 1.35 a, so it can provide up to 1 a DC current to the load according to the application conditions. The output voltage can be set from 1.235 V to VIN.
The LM124-N series consists of four independent, high-gain, internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltages. Operation from split-power supplies is also possible and the low-power supply current drain is independent of the magnitude of the power supply voltage.
The LFXX is a very low drop regulator available in TO-220, TO-220FP, DPAK and PPAK packages and in a wide range of output voltages. The low drop voltage (0.45 V) and low quiescent current make it particularly suitable for low-noise, low-power applications and especially in batterypowered systems.
FDA803S and FDA903S are the latest single channel fully differential 10W Class D audio power amplifiers in the Italian French semiconductor FDA (pure digital amplifier) series. Target applications include emergency road rescue, remote information processing and any vehicle system that requires audio channel to generate voice, music or prompt messages with maximum 10W standard output power.
The STMICRO EVALST-3PHISOSD evaluation board implements a complete three-phase current meter with a low-cost shunt current sensor. The solution is based on the ISOSD61 device, a single-channel, electrically isolated second-order sigma-delta modulator that measures the current of each phase through a shunt current sensor.
STMicroelectronics LSM6DSV iNEMO Inertial Module is a system-in-package featuring a 3-axis digital gyroscope and a 3-axis digital accelerometer. It has a triple core for processing acceleration and angular rate data on three separate channels with dedicated configuration, filtering, and processing.
STMicroelectronics X040 Sensitive gate SCR and Z040 Triterminal bidirectional SCR are 750V devices designed for power regulation and switching applications. A unidirectional X040 sensitive gate SCR can conduct current in one direction and block current in the other
To expand the capabilities of development tools and accelerate embedded artificial intelligence (AI) and machine learning (ML) development projects, stmicroelectronics has released the NanoEdge AI Studio and STM32Cub.AI. The updated version of These two development tools help move artificial intelligence and machine learning to application edge devices. After moving to the edge of the network, the benefits of AI and machine learning are outstanding, including native privacy protection, deterministic real-time response, higher reliability, and lower power consumption
STSPIN233 of STMicroelectronics provides a high level of integration, allowing three diffluent topologies and three independent inputs, making it possible to use FOC sensorless algorithms in portable IoT applications.
The stmicroelectronics IPS4260L is a monolithic high-speed device capable of driving four independent capacitive, resistive or inductive loads with one side power connection voltage. Four integrated diodes clamp the inductive load to produce a switching transient. Built-in hot shutdown protection chip to prevent overheating and short circuit
