Melexis has introduced a new ToF 3D camera, the MLX75026, which is equipped with a fully integrated Infrared Band-pass (IRBP) filter. By incorporating IRBP, it eliminates the need to incorporate a separate infrared filter in the lens or sensor assembly. The device is targeted at automotive applications, including safety applications related to driver monitoring, in-car monitoring, gesture control, and airbag deployment
Renesas Electronics has expanded its cloud environment lab to simplify the configuration and testing process and speed time-to-market. On-cloud LABS allow customers to remotely access, configure, monitor, test and measure solutions 24/7 in a full-fledged cloud-connected lab. The company has also added 14 popular assessment boards to its Cloud Environment lab
RDS now offers an 11.6-inch Tianma TFT display module TM116VDSP02, and offers full HD (1920 x 1080 pixels) resolution, 16:9 aspect ratio, high brightness levels, and excellent optical performance. Also provides a common, capable display solution for a wide range of display applications, especially those where high levels of ambient or outdoor light may be present
Vishay Intertechnology has introduced a new line of high power thin-film packaged chip resistors qualified for the AEC-Q200. The device has a resistance range of 10-ohm to 30.1kOhm, low noise less than -30dB, low voltage coefficient < 0.1ppm/V, working voltage 200V. And meet roHS standards. Widely used in automotive power supplies, braking systems, car chargers, motor deflection circuits and industrial testing and measuring equipment
Mouser is helping today's design engineers deliver insightful content around exciting new sensor technologies. With the rapid development of the Internet of Things and intelligently connected devices, manufacturers have made significant advances in sensor technology and performance, producing smaller, cheaper and better performing products. To achieve the latest design solutions
Siretta's QUARTZ GOLD Router, currently offered by RS Components, is a high-performance industrial router that offers a rugged design packaged in a small metal case, making it ideal for deployment in industrial embedded applications. The device comes as standard, With a single SIM card slot, dual port Gigabit Ethernet capabilities and optional GNSS capabilities, it is ideal for asset tracking or access management applications
A few months after the first launch of the Raspberry Pi RP2040 microcontroller, Sfera Labs has released what it claims is the first industrial product based on the new chip. The devices include the RP2040, the first high performance microcontroller chip created by Raspberry PI and targeted at the industrial and amateur markets. With a wide range of 12-24V power input and power relay output, support industry standard 0-10V/4-20mA analog input, 0-10V analog output, digital INPUT/output line, RS-485 serial interface.
Infineon Technologies has introduced a simple backpack with automotive performance 2B EDT2, a flexible, retractable half-bridge power module. Another unique feature of this module is the plug-and-play approach, which simplifies module integration.
Renesas Electronics Corporation has expanded its environmental sensor portfolio with the launch of its first thermothermopile based detector family with integrated optical filters for optical (NDIR) CO2 sensors. The new detectors also provide fast response times to ensure high accuracy in mission-critical applications. And the new thermopile based detector complements the company's current lineup of environmental sensors for air quality monitoring.
A common need for packaging equipment lines is the requirement for frequent access to adjust, correct, re-set or reprogramme. This is a situation where the ingenious Elesa CFSW combined hinge and electrical cut-off switch provides a safe and straightforward solution.The device is double insulated and approved by IMQ CA02.04800 in compliance with EN 60947-1/2007 + EN 60947-5-1:2004 + A1/2009.
Intepro Systems offers a full suite of test services to the battery industry, including up to 2MW of batteries and battery testers and battery simulators for research and OEM applications in the electric vehicle, aerospace and other industries. Its integrated test system uses the latest regeneration technology and products available include a bi-directional DC power supply and a 1.9MW automatic ranging source
TDK has added a new three-phase AC input model to the TDK-Lambda DRB series of low-cost DIN rail mounting power supplies. DRB three-phase series is also an ideal product for a wide range of applications. It also accepts a wide range of inputs from 350 to 575VAC, with isolation of input to output at 3,510VAC, ground input at 2210VAC, and ground output at 1390 VAC. It is certified by IEC/EN/UL/CSA 62368-1, 61010-1, 61010-2-201 and E/UKCA low voltage, EMC and RoHS directives
Anritsu Corporation is developing the world’s first 5G OTA*1 RF test system in partnership with Toyota and their investment in MVG*2 OTA test environment utilising Anritsu's Radio Communication Test Station MT8000A.Realising autonomous driving demands simultaneous communications with the surrounding environment,
TDK has expanded its Micronas Right-angle Hall effect sensor family with HAR 3927. The device provides a fully redundant sensor solution for safety-critical automotive applications. Each sensor consists of two stacked molds that work independently. The device also comes in a small 8-pin SOIC8 package.
Lynred's new line of 12 micron products provides optoelectronic systems with a higher level of performance to more accurately identify objects in low-contrast scenes. The company now offers enhanced capabilities across the full range of its 12µm infrared detectors, with applications including integration into outdoor leisure equipment for use at dawn or at night.
HUBER+SUHNER's new three-in-one separator solution improves GPON distribution network performance by increasing fiber density. By eliminating the need for separator modules, customers can increase rack space and optimize existing infrastructure and FTTH distribution. The SFO cable system was developed for fixed access network customers. The ultra-compact design also saves up to 30% of rack space for additional equipment and applications
RECOM has added the RSH2 series to its DC-DC converter range. The series offers a fully adjustable 3.3V (2.8-5.5V), 5V/9V (4.5-13.2V), 12V (9-18V), and 24V (18-36V) nominal input, suitable for battery or bus powered systems. Also available are 3.3V, 5V, 12V, 15V, and 24V outputs. The isolation level is 2kVDC/60s(3kVDC/60s is optional), and the device is UL/IEC/EN 62368-1 certified. Rohs-2 compliant.
Southco has added its Vise Action compression latching line with a new override version that enables the operator to identify whether the latching is on or off. The new device expands Southco's safe And Visible line of products. To improve security and monitor access across a wide variety of applications
