Latest from Texas Instruments (TI) are the easy-to-use TPS562210 and TPS563210, 2A and 3A synchronous step-down converters in 8-pin SOT-23 packages. The devices are optimized to operate with minimum external component counts and also optimized to achieve low standby current.
Intersil’s ISL8272M 50A digital DC-DC PMBus power module integrates a digital PWM controller, dual-phase power MOSFETs, inductors, and passive components. The ISL8272M does not require airflow or a heatsink, and can work in a current-sharing configuration with up to 4 modules to provide up to 200A of continuous current. The ISL8272M operates with the ChargeMode control architecture, which responds to a transient load within a single switching cycle.
Kingbright’s wide range of SMD LED’s with dome lenses in various packages include 0603 package (KPTD-1608), 1206 package (KPTD-3216), PLCC package (KPED-3528) and many others. The dome lens packages provide narrow viewing angles of 15 to 30 degrees allowing a more focused and brighter intensity output and eliminating any light bleeding issues.
The Texas Instruments (TI) MSP-TS432PZ100 Target Socket Board is a standalone ZIF socket target board used to program and debug the MSP432 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports all MSP432P401x Flash parts in a 100-pin LQFP package.
On Semiconductor’s NCS2003 operational amplifier is designed to ensure high-performance operation in low-voltage low-power applications. The NCS2003 is a low-voltage operational amplifier with rail-to-rail output drive capability. Its 1.8V operation allows high performance operation in low-voltage, low-power applications.
Microchip has introduced a new 14-member dsPIC33EP ‘GS’ family of digital signal controllers (DSCs). The family delivers the performance needed to implement more sophisticated non-linear, predictive and adaptive control algorithms at higher switching frequencies.
Murata BNX Series EMI network filters, The EMI suppression filters supporting large current, wide frequency and SMD mounting. They are effective for noise suppression for DC switching lines of automotive and FA/OA devices and covers a wide temperature range from -55C to 125C.
The NXP QN902X ultra-low power BLE system on chip (SoC) integrates a Bluetooth v4.0 low energy radio with an ARM Cortex-M0 MCU. The single-chip solution offers room to run applications, provide signal processing, or it can be used as a Bluetooth network processor by connecting the QN902X to an application processor.
The affordable boards, the STM32 Nucleo boards from ST Microelectronics, allow design engineers to try out new ideas and quickly create prototypes with any STM32 MCU, says the company. The STM32 Nucleo boards share Arduino connectors and ST Morpho headers, so they can easily be extended with a wide range of application related hardware add-ons.
Molex Perma-Seal terminal connectors provide a rugged, environmentally sealed connection for wire sizes 8 to 22 AWG. Perma-Seal terminals and splices insulate, seal, and protect joints from hard use and abrasion, water, salt, and other corrosive compounds. The waterproof adhesive terminals and splices provide long-lasting, moisture-proof connections that withstand many corrosive fluids: saltwater, hydraulic fluids, and gasoline making them suitable for industrial, marine and automotive applications.
Texas Instruments has announced the ADS54J60 as the industry’s first 16-bit 1-GSPS analog-to-digital converter (ADC) and the first to achieve over 70dBFS signal-to-noise ratio (SNR) at 1-GSPS. The company has also announced the highest density four-channel 14-bit 500-MSPS ADC, the ADS54J54.
The ams AS5047D magnetic position adapter board enables quick and easy evaluation of the principle function of the AS5047D magnetic position sensor within the user’s own system design. Developed using a small factor board, AS5047D includes the position sensor with its required external components. All relevant signals are available on a 2.54mm header footprint and can be easily wired to the user’s application.
TE Connectivity’s TERMI-BLOK 10.16mm PCB terminal blocks feature side wire entry, board interlocking and a test facility. The vertical-mount PCB terminal blocks are made from green polyamide 6.6 GF, have M3 screw clamp terminals and accept a wire size range of 30 to 12 AWG.
NKK’s elegantly designed frameless OLED SmartSwitch, the high-definition pushbutton has a contrast and resolution of 96 RGB x 64 pixels in a compact frame. With a range of 65,536 colours in a 16-bit mode, the frameless pushbutton has redefined the SmartSwitch line. It possesses the same footprint as current SmartSwitches, allowing for easy replacement of current 64 x 48 OLED switch models.
Vishay SiHx28N60EF / SiHx33N60EF EF Series Power MOSFETs, the 600V fast body diode N-Channel power MOSFETs were developed for ZVS / soft switching PWM topologies such as phase shifted bridges and LLC converter half bridges. The SiHx28N60EF / SiHx33N60EF EF Series Power MOSFETs increase reliability in these applications by delivering a 10x lower Qrr than standard MOSFETs.
Intersil has unveiled PowerNavigator version 5.2, a free, downloadable graphical user interface (GUI) that helps system designers quickly configure, validate and monitor their power supply architectures. The new features included in PowerNavigator 5.2 enable a high degree of power supply optimization. Combined with the drag-and-drop GUI interface, PowerNavigator 5.2 makes it straightforward to change features and functions of a digital power supply design without writing a single line of code.
CUI has introduced a new 3000W front-end AC/DC power supply for mission-critical (N+1) redundant applications. The PSE-3000-48 delivers a power density of 33.48W/cubic inch and achieves Platinum efficiency in a compact standard 1U package measuring just 40.64mm x 101.6mm x 355.6mm).
Designed to deliver circuit protection in Gigabit Ethernet applications, smartphones, video card interfaces and more – ProTek Devices has introduced a new ultra low–capacitance (0.9pF) steering diode / transient voltage suppressor array (TVS array). The PAZC099 is rated for 5V applications with 100 watts peak pulse power per line (8/20 micro seconds). It is also ideal for circuit protection in USB 1.0, 2.0 and 3.0 applications, DVI interfaces and other portable electronics, says the company.
