Mill-Max connector products designed for combined signal and power transmission applications. They eliminate the need to source separate connectors for power and signal, simplify board layouts, provide versatility and deliver reliable and consistent performance.
Murata’s RUW15 series of 15W ultra-wide single output isolated DC-DC converters are designed for transportation, industrial and telecommunication applications with variable input voltages or high transient voltages and where a hold-up capability is required.
TT Electronics’ WHS series wirewound high-surge resistors. The resistors have been successfully qualified by a global manufacturer of smart energy meters in stringent surge tests designed to simulate the effect of lightning strikes on power lines.
New from Texas Instruments, the LMT70 is an ultra-small, high-precision, low-power CMOS analog temperature sensor with an output enable pin.
Harting DIN 41612 type 2R backplane signal connectors are designed for PCB applications with a maximum of 2A per contact, SMC compatible.
Abracon’s 32.768kHz MEMS & SMD MEMS oscillators are designed for a range of applications including general timekeeping and battery management.
The four-Channel, 24GHz ADF5904 receiver downconverter and the related evaluation board and controller board from Analog Devices is available in a compact 32-lead, 5mm × 5mm LFCSP package, the ADF5904 receiver downconverter is ideal for automotive radars, industrial radars and microwave radar sensors.
TE Connectivity’s Deutsch 369 connector series. A high-reliability, lightweight, compact and cost-efficient interconnect solution, the 369 Series interconnects withstand vibration, are fully sealed and suit aerospace and other harsh-environment applications.
Analog Devices’ ADA4350 is an analog front end for photodetectors or other sensors whose output produces a current proportional to the sensed parameter or voltage input applications where the system requires the user to select between very precise gain levels to maximize the dynamic range.
The STM32F7 series of high-performance MCUs with ARM Cortex-M7 core takes advantage of STMicroelectronics’ ART Accelerator as well as an L1 cache to deliver the maximum theoretical performance of the Cortex-M7, says the company.
The Texas Instruments (TI) ONET1130EP is an integrated modulator driver and limiting amplifier designed to operate from 1Gbps to 11.7Gbps. Optical and electrical loopback are included and a two-wire serial interface allows digital control of the features.
Analog Devices’ AD9684 14-Bit 500MSPS LVDS dual analog-to-digital converters (ADCs). The devices feature an on-chip buffer and a sample-and-hold circuit designed for low power, small size, and ease-of-use.
Schurter has announced its PSE HI switches can now be delivered with raised symbols, letters and numbers in addition to various colours, or legend inscriptions.
IXYS X-Class power MOSFETs. The high-power density n-channel enhancement-mode MOSFETs are easy to mount and have a low RDS(ON) and QG with a low package inductance.
Cypress Semiconductor has introduced a new 1Mb nonvolatile static random access memory (nvSRAM) with a Quad serial peripheral interface (SPI). The Quad SPI interface enables the new nvSRAM to exceed the data throughput of larger parallel interface devices with a smaller footprint.
The high-efficiency STMicroelectronics L99LD01 constant-current LED driver is aimed at applications such as automotive day time running lights and LED headlamps.
Texas Instruments (TI) has introduced the industry’s first 20A and 30A synchronous DC-DC buck converters with frequency synchronization for low-noise and reduced EMI/EMC and a PMBus interface for adaptive voltage scaling (AVS).
Avago Technologies’ industrial-grade high-temperature (-40C to 115C), AEDT-981x three-channel optical incremental encoder modules. They offer a built-in interpolator circuit and enable high resolution in a compact module for motion-control applications.